Wi-Fi 6 11ax M.2 AE Key Module AW7915-AED
Original price was: $80.00.$28.00Current price is: $28.00.
The AW7915-AED is a Wi-Fi 6 M.2 AE key Module with a Mediatek MT7915DAN chipset, supporting a PHY rate of 573+1201 Mbps in 2.4GHz and 5GHz bands, compliant with IEEE 802.11ax/ac standards.
High-Performance Wi-Fi 6 M.2 Module: AW7915-AED with Dual-Band Dual Concurrent Support – 2T2R Dual Bands Dual Concurrents IEEE802.11ax 2.4GHz / 5 GHz by MediaTek MT7915
Introducing the AW7915-AED Wi-Fi 6 M.2 AE key Module – it’s a real powerhouse! It’s all thanks to the Mediatek MT7915DAN chipset that’s under the hood. This module boasts a blistering PHY rate of 573+1201 Mbps and is fully in line with the IEEE 802.11ax/ac standards. What makes it stand out is its ability to handle Dual Bands Dual Concurrent (DBDC) mode, which means it can simultaneously work its magic in both the 2.4GHz and 5GHz bands. So, you get a top-notch wireless experience. But here’s where it gets even more exciting – this module has some serious tech inside. It’s got optimized RF architecture and baseband algorithms, which means it performs like a champ while sipping power conservatively. Plus, it’s smart enough to take on some of the Wi-Fi tasks, so your host processor can breathe easy. Security? No problem! The MT7915DAN chipset has all the standard-based features covered – think top-notch security, quality of service, and international regulations.
Key capabilities and benefits
- The operation of Wi-Fi 6E in the 6 GHz spectrum offers extremely wide 160 MHz channels and additional capacity, leading to enhanced network performance.
- Orthogonal frequency division multiple access (OFDMA) more efficiently allocates channels, thereby increasing network efficiency and reducing latency for both uplink and downlink traffic in high-demand environments.
- Multi-user multiple input, multiple output (MU-MIMO) allows more uplink and downlink data to be transferred at once and enables an access point to handle a larger number of concurrent clients
- The ability to utilize a 160 MHz channel increases bandwidth, resulting in enhanced performance with minimal latency.
- 1024 quadrature amplitude modulation mode (1024-QAM) enables throughput increases by encoding more data in the same amount of spectrum.
- Transmit beamforming enhances signal power, leading to significantly higher data rates within a specified range.
Wi-Fi generation comparison overview
Feature | Wi-Fi 4 | Wi-Fi 5 | Wi-Fi 6 |
Channel bandwidth (MHz) | 20, 40 | 20, 40, 80, 80 + 80, 160 | 20, 40, 80, 80 + 80, 160 |
Frequency bands | 2.4 and 5 GHz | 5 GHz | 2.4,5, and 6 GHz |
Maximum data rate | 150 Mbps | 3.5 Gbps* | 9.6 Gbps* |
Highest subcarrier modulation | 64-QAM | 256-QAM | 1024-QAM |
Spatial streams | 1 | 4 | 8 |
Underlying technology | IEEE 802.11n | IEEE 802.11ac | IEEE 802.11ax |
* Depending upon number of spatial streams and channel used
Specification Comparison Chart : Best-Selling Wi-Fi Module
Learn more on our blog: How to choose good performance Wi-Fi module for Robot?
Follow us on Linkedin : From Wireless to IoT : AsiaRF’s Journey of Innovation
- PHY rate: 2T2R in 2.4GHz+2T2R in 5GHz with support of up to 573+1201Mbps
- Channels Bandwidth: Supports 20, 40, 80 channels HE MCS0 11 BW20/40/80MHz with Nss=1~2
- Short Guard Interval
- Space time block code (STBC)
- Low Density Partiy check (LDPC)
- Support digital pre distortion to enhance PA performance
- Smoothing (channel estimation) extension to MIMO case
- DFS radar detection
- Embedded ARM Cortex R4 processor for full host CPU offload
- Microprocessor: Embedded 32 bit RISC
- Support STBC, LDPC, TX Beamformer and RX Beamformee Decoded BW20/40/80 up to 4×2 MU materix feedback
- Modes: Greenfield, mixed mode, legacy modes support
- Highly integrated RF with 40nm low power process
- Noise mitigation:
- Supports background scan function for fast channel switching
- Supports spectrum analysis for non Wi-Fi signals
- Intelligent power saving: WFA WMM, WMM PS (QoS)
- Integrate high efficiency: internal 2.4G/5G PAs
- Intelligent Calibration (iCal) reduces the production time
Standards | Wireless: IEEE 802.11ax/ac/b/g/n (4Tx4R) |
Data Rate | IEEE802.11ax 2401Mbps @TX/RX IEEE802.11ac 1733Mbps @TX/RX IEEE802.11a/n 600Mbps @TX/RX IEEE802.11a/g 108Mbps IEEE802.11b 22Mbps |
Output Power | 11b: 23dbm+/- 1.5dbm @11Mbps 11g: 20dbm+/- 1.5dbm @54Mbps 11g/n: 20dBm +/- 1.5dbm @MCS7, HT20 17dBm@MCS7,HT40 11a: 19.5dBm +/- 1.5dbm @54Mbps 11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20+/-1.5dBm @MCS8 11ac HT40: 17+/-1.5dBm @MCS9 11ac HT80: 14.5+/-1.5dBm @MCS9 11ax HT20: 20+/-1.5dBm @MCS9 11ax HT40: 17 +/- 1.5dBm @MCS9 11ax HT80: 14.5 +/- 1.5dBm @MCS11 |
Receiver Sensitivity | 11b: -99dBm @11Mbps 11g: -95dBm @54Mbps 11g/n: -90dBm @HT20, MCS7 -86dBm @HT40, MCS7 11a: -90Bm @54Mbps 11a/n: -85dBm @HT20, MCS7 -81dBm @HT40, MCS7 11ac: -90dBm +/- 2dBm @VHT20 MCS8 11ac: -85dBm +/- 2dBm @VHT40 MCS9 11ac: -68dBm +/- 2dBm @VHT80 MCS9 11ax: -61dBm +/- 2dBm @HE20 MCS11 11ax: -58dBm +/- 2dBm @HE40 MCS11 11ax: -55dBm +/- 2dBm @HE80 MCS11 |
Antenna | External Antenna connector (IPEX) x2 |
Frequency Range | US, Canada 2.412 GHz ~ 2.462 GHz (CH1~CH11) EU, Japan: 2.412 GHz ~ 2.472 GHz (CH1~CH13) 5.15 GHz ~ 5.875 GHz |
Software | Security: 64/128-bit WEP Encryption, WPA, WPA2 Driver: Linux |
Operating Voltage | DC 3.3V ± 5% |
Temperature | Operating: 0°C ~ +70°C Storage : -20°C ~ +90°C |
Humidity | Operating Humidity: 10%~90% non-condensing Storage Humidity: 10%~90% non-condensing |
Dimension | 50.95(H) x 30(W)mm |
Power consumption maximum is 9W, average is 4 – 8W.
Main board Power Supply design please provide 3.3V 3A, minimum 3.3V 2.5A.
Weight | 0.0185 kg |
---|---|
Dimensions | 9.5 × 6.5 × 1.5 cm |
Halloween HaLow Promo | None, 4-package, 10-package |