Wi-Fi 6 11ax 4T4R Mini PCIe Module AW7915-NP1
Original price was: $80.00.$28.00Current price is: $28.00.
AW7915-NP1 is a Wi-Fi 6 11ax 4T4R 2401Mbps mini PCIe Module by MT7915. It fully complies with IEEE 802.11ax/ac and IEEE 802.11 ac/a/b/g/n standards, delivering reliable wireless connectivity with optimized performance and low power consumption.
AW7915-NP1: High-Speed Wi-Fi 6 Mini PCIe Module with Low Power Consumption — Wi-Fi 6 4T4R Dual Bands Selectable mPCIe Card IEEE802.11ax / ac / a / b / g / n 2.4G / 5GHz powered by MediaTek MT7915
FCC ID: CE, FCC ID: TKZXXXXXX-XXX; IC ID:996XX-XXXXXXXXX
(If you require detailed certification numbers, please contact our Sales Team: [email protected])
The AW7915-NP1 is a mini PCIe Module from MT7915, and it’s all about supercharged Wi-Fi. It’s like having a speed demon in your device, with Wi-Fi 6 (that’s the fancy 11ax) support, boasting 4T4R for a blazing 2401Mbps speed. What’s cool is that it plays nice with all the Wi-Fi standards you’ve ever heard of, like 802.11ax/ac and the older ac/a/b/g/n. It’s your ticket to rock-solid wireless connections that won’t drain your battery. This module has some high-tech tricks up its sleeve. It’s got smart RF architecture, a clever MAC design, and PCIe interfaces built in to keep your bandwidth stable.
Key capabilities and benefits
- The operation of Wi-Fi 6E in the 6 GHz spectrum offers extremely wide 160 MHz channels and additional capacity, leading to enhanced network performance.
- Orthogonal frequency division multiple access (OFDMA) more efficiently allocates channels, thereby increasing network efficiency and reducing latency for both uplink and downlink traffic in high-demand environments.
- Multi-user multiple input, multiple output (MU-MIMO) allows more uplink and downlink data to be transferred at once and enables an access point to handle a larger number of concurrent clients
- The ability to utilize a 160 MHz channel increases bandwidth, resulting in enhanced performance with minimal latency.
- 1024 quadrature amplitude modulation mode (1024-QAM) enables throughput increases by encoding more data in the same amount of spectrum.
- Transmit beamforming enhances signal power, leading to significantly higher data rates within a specified range.
Wi-Fi generation comparison overview
Feature | Wi-Fi 4 | Wi-Fi 5 | Wi-Fi 6 |
Channel bandwidth (MHz) | 20, 40 | 20, 40, 80, 80 + 80, 160 | 20, 40, 80, 80 + 80, 160 |
Frequency bands | 2.4 and 5 GHz | 5 GHz | 2.4,5, and 6 GHz |
Maximum data rate | 150 Mbps | 3.5 Gbps* | 9.6 Gbps* |
Highest subcarrier modulation | 64-QAM | 256-QAM | 1024-QAM |
Spatial streams | 1 | 4 | 8 |
Underlying technology | IEEE 802.11n | IEEE 802.11ac | IEEE 802.11ax |
* Depending upon number of spatial streams and channel used
Product features:
- Diversified Module Specifications: We offer a variety of Wi-Fi modules from basic to high-end, standard to custom sizes, and low-power to high-performance.
- Cross-Industry Applications: Suitable for various industries such as manufacturing, retail, energy, agriculture, etc.
- Quality First: All products undergo stringent quality control and testing.
- Professional Technical Support: Our professional team is always available to provide technical assistance.
- Limited-Time Promotions: We regularly hold promotional activities, allowing you to purchase products at a discount or receive additional rewards.
- We firmly believe that our strategic partnerships with leading chip companies such as Morse Micro and MediaTek will further enhance our product supply and access to cutting-edge technology.
Specification Comparison Chart : Best-Selling Wi-Fi Module
Learn more on our blog : How to choose good performance Wi-Fi module for Robot?
- Support Multiuser: Supports 4×4 4SS 11ax wave2 MU-MIMO
- MU-MIMO configurations of
- 4 users: 4*1ss
- 3 users: 2*1ss + 1*2ss or 3*1ss
- 2 users: 2*2ss or 1*1ss + 1*2ss or 2*1ss
- Channels Bandwidth: Supports 5, 10, 20, 40, 80, 80+80 channels
- Efficiency Wireless Networking: Support MU-OFDMA TX/RX
- Embedded ARM Cortex R4 processor for full host CPU offload
- Microprocessor: Embedded 32-bit RISC
- Support STBC, LDPC, TX Beamformer and RX Beamforming
- Modes: Greenfield, mixed mode, legacy modes support
- Highly integrated : RF with 40nm low power process
- PHY rate: 4T4R with support of up to 2401Mbps
- Configurable: 4×4/3×3
- Noise mitigation:
- Supports background scan function for fast channel switching
- Supports spectrum analysis for non-Wi-Fi signals
- Intelligent power saving: WFA WMM, WMM PS (QoS)
- Integrate high efficiency: internal 4G/5G PAs
- Intelligent Calibration (iCal): reduces the production time
- WoWLAN via GPIO (client mode), supports Host Sleep (AP mode)
Standards | Wireless: IEEE 802.11ax/ac/b/g/n (4Tx4R) |
Data Rate | IEEE802.11ax 2401Mbps @TX/RX IEEE802.11ac 1733Mbps @TX/RX IEEE802.11a/n 600Mbps @TX/RX IEEE802.11a/g 108Mbps IEEE802.11b 22Mbps |
Output Power | 11b: 23dbm+/- 1.5dbm @11Mbps 11g: 20dbm+/- 1.5dbm @54Mbps 11g/n: 20dBm +/- 1.5dbm @MCS7, HT20 17dBm@MCS7,HT40 11a: 19.5dBm +/- 1.5dbm @54Mbps 11a/n: 19.5dBm+/- 1.5dbm @MCS7, HT20 17dBm@MCS7, HT40 11ac HT20: 20+/-1.5dBm @MCS8 11ac HT40: 17+/-1.5dBm @MCS9 11ac HT80: 14.5+/-1.5dBm @MCS9 11ax HT20: 20+/-1.5dBm @MCS9 11ax HT40: 17 +/- 1.5dBm @MCS9 11ax HT80: 14.5 +/- 1.5dBm @MCS11 |
Certification | CE FCC ID: TKZAW7915NP1 IC ID: 9968A-AW7915NP1 |
Receiver Sensitivity | 11b: -99dBm @11Mbps 11g: -95dBm @54Mbps 11g/n: -90dBm @HT20, MCS7 -86dBm @HT40, MCS7 11a: -90Bm @54Mbps 11a/n: -85dBm @HT20, MCS7 -81dBm @HT40, MCS7 11ac: -90dBm +/- 2dBm @VHT20 MCS8 11ac: -85dBm +/- 2dBm @VHT40 MCS9 11ac: -68dBm +/- 2dBm @VHT80 MCS9 11ax: -61dBm +/- 2dBm @HE20 MCS11 11ax: -58dBm +/- 2dBm @HE40 MCS11 11ax: -55dBm +/- 2dBm @HE80 MCS11 |
Antenna | External Antenna connector (IPEX) x4 |
Frequency Range | US, Canada 2.412GHz~2.462 GHz (CH1~CH11) EU, Japan: 2.412GHz~2.472GHz (CH1~CH13) 5.15GHz ~5.875GHz |
Software | Security: 64/128-bit WEP Encryption, WPA, WPA2 Driver: Linux |
Operating Voltage | DC 3.3V ± 5% |
Temperature | Operating: 0°C ~ +70°C Storage : -20°C ~ +90°C |
Humidity | Operating Humidity: 10%~90% non-condensing Storage Humidity: 10%~90% non-condensing |
Dimension | 50.95(H) x 30(W)mm |
Power consumption maximum is 9W, average is 4 – 8W
Main board Power Supply design please provide 3.3V 3A, minimum 3.3V 2.5A.
Weight | 0.0185 kg |
---|---|
Dimensions | 9.5 × 6.5 × 1.5 cm |