Products
Wi-Fi Products included all Wi-Fi Standards

AWM003 BIG Memory Tiny Ralink 802.11n Wireless AP Router Module Board

$13.00

AWM003 is a small-size 38x47mm, 802.11n AP board that achieves a data rate up to 150Mbps.

x

AWM003 is a small-size, 802.11n AP board that achieves a data rate up to 150Mbps. 3 times faster than the legacy 11g model but is priced less, making it more cost-effective.

  • BIG Memory Tiny 802.11n AP Router Module
  • Low Temperature max to 60 Celsius degree with full speed running
  • Wi-Fi Direct H.264 IP camera AP Router Module
  • Wi-Fi Storage Drive AP Router Module
  • Wi-Fi Electronic Power Control AP Router Module
  • Wi-Fi UART RS232 Control AP Router Module

 

Overview

AWM003 is a small-size, 802.11n AP board that achieves a data rate up to 150Mbps. 3 times faster than the legacy 11g model but is priced less, making it more cost-effective. This product supports Router, APClient, Wi-Fi Repeater modes. Multi-purpose installation to share wireless connection with supporting 64/128-bits WEP, TKIP,WPA, WPA2,AES and WPS, helps to protect your data and privacy during transmission.  Easy for system board like IP Camera, 3G station, Storage system, Smart TV, IPTV, STB, Media Player, Femto, XDSL, Cable Modem, Industrial PC, Ethernet Switch, Printer Server, Connected TV, Smart Phone and Portable CPE For WiMAX/LTE.

AWM003 BIG Memory Tiny Ralink 802.11n Wireless AP Router Module Board_size

Learn more on our blog : From Wireless to IoT : AsiaRF’s Journey of Innovation

Or follow us on Linkedin

  • Ralink RT5350 chipset with Interface  USB, I2C, I2S, PCM, UART, LED, RJ45 LAN ports and GPIOs.  
  • Low Temperature max to 60 Celsius degree with full speed running
  • Support boot from Flash
  • Data Rate up to 150Mbps
  • Security: 64/128-bits WEP, TKIP,WPA, WPA2,AES,WPS
  • Multi-modes: AP/Client

Hardware Features:

Standard IEEE 802.11 b/g/n standards compliant
Wireless LAN 1T1R Mode
Memory Size Flash: 16MB, 8MB, 4MB, 2MB optional you can choose one, default is 8MB, 4MB
SDRAM: 64MB
Antenna iPex Connector *1 ( PIFA optional )
16-pin Interface USB*1 ( Host )
UART*1
GPIOs
VCC/GND
Frequency Range 2.400 ~ 2.4835GHz ( subject to local regulations)
Number of Selectable
Channels
802.11n 20MHz/40MHz ;
802.11b/g
USA, Canada (FCC):11 channels (2.412GHz~2.462GHz)
Europe (CE): 13 channels (2.412GHz~2.472GHz)
Japan (TELEC): 14 channels (2.412GHz~2.4835GHz)
Data Rate 802.11n: up to 300Mbps
802.11b: 1, 2, 5,5, 11Mbps
802.11g: 6, 9, 12, 18, 24, 36, 48, 54Mbps
Coverage Area Up to 6 times faster then existing 802.11 b/g products
Transmit  Power(EIRP) 11n HT40 MCS7 : +14 dBm
11b CCK: +20 dBm
11g OFDM: +16 dBm
Receiver Sensitivity -70dBm at HT40 MCS7
-78dBm at 54Mpbs
-90dBm at 11Mpbs
Dimension 38×47 mm
Certifications FCC/CE by request

SOFTWARE FEATURE

 

  • Network Features:
      • DHCP Client/Relay/Server
      • Dynamic DNS
      • NTP Client
      • DNS Cache/Proxy
      • Firewall
        • MAC/IP/Port Filter
        • Virtual Server
        • DMZ
        • Content Filter
  • Wi-Fi:
      • One Transmit and One Receive paths(1T1R)
      • 20MHZ/40MHZ bandwidth.
      • Support Multiple SSID
      • Clock rate up to 400MHzLegacy and High Throughput Modes.
      • Support WPS
      • High security with build-in: WEP 64/128, TKIP, WPA, WPA2 mixed,802.1xand 802.11i
      • 802.1X Authentication with RADIUS Client
      • QoS-WMM.WMM-PS

PIN DEFINITION

 

 

PIN I

 

 

Description
Pin
Pin
Description
+3.3V
2
1
+3.3V
UART_Rx
4
3
GND
UART_Tx
6
5
Reserved
GND
8
7
WPS/Reset to Default #
LED_WLAN#
10
9
GND
LED_WPS#
12
11
USB_D+
AP/Client selection
14
13
USB_D-
+1.2V
16
15
+1.2V
GPIO #19 18 17 TX0+
GPIO #18 20 19 TX0-
GPIO #17 22 21 RX0+
LINK0_LED 24 23 RX0-

 

PIN II

 

Description
Pin
Pin
Description
I2SCLK
2
1
PCMFS
I2SWS
4
3
PCMCLK
I2SSDO
6
5
PCMDRX
I2SSDI
8
7
PCMDTX
I2C_SCLK
10
9
I2C_SD
TXDM1
12
11
TXDP1
RXIM1
14
13
RXIP1
GND 16 15 GND
重量 0.008 公斤
尺寸 9.5 × 6.8 × 1.5 公分

Subscribe

Subscribe to receive the up-to-date news and stay informed of the latest developments.

Please enable JavaScript in your browser to complete this form.
Name
Subscribe to our newsletter to receive news updates