XSquare 5G Data Card XS5G03-GBO-U
Original price was: $290.00.$230.00Current price is: $230.00.
The XS5G03-GBO-U data card provides robust support for 5G/4G/3G networks through a USB interface.
It integrates the MediaTek 5G solution, built upon 3GPP Release 15 technology.
This product is manufactured in Taiwan.
The XS5G03-GBO-U data card provides robust support for 5G/4G/3G networks through a USB interface.
It integrates the MediaTek 5G solution, built upon 3GPP Release 15 technology.
This product is manufactured in Taiwan.
XSquare-Service mail address: [email protected]
Learn more on our blog : From Wireless to IoT : AsiaRF’s Journey of Innovation
XS5G03-GBO-U Data Card Specification
5G NR | |
Standard | 3GPP Release 15 |
SA Bands | n1/2/3/5/7/8/20/25/28/30/38/40/41/48/66/71/77/78/79 |
NSA Bands | n1/2/3/5/8/20/28/38/41/66/71/77/78/79 |
Sub-6 CA | FDD/TDD+FDD/TDD DL CA* |
DL 4×4 MIMO | n1/2/3/7/25/30/38/40/41/48/66/77/78/79 |
UL 2×2 MIMO | n41/77/78/79 |
4G LTE | |
LTE Category | Cat 12 |
LTE Bands | B1/2/3/4/5/7/8/12/13/14/17/18/19/20/25/26/28/29/ 30/32/34/38/39/40/41/42/43/46/48/66/71 |
DL CA | 4×4 MIMO, 3CC |
UL CA | 2CC |
3G UMTS/WCDMA | |
Bands | B1/B2/B4/B5/B8 |
GPS | |
Standard | GPS/GLONASS/BeiDou/Galileo |
Frequency Band | L1 |
Main Data Through(peak) | |
5G NR DL/UL | 2.77Gbps / 1.25Gbps |
4G DL/UL | 600Mbps / 150Mbps |
3G DL | 42.2Mbps (DC-HSPA+) |
3G UL | 11.5Mbps |
Certifications | |
Standard | FCC / CE / JRF&JPA / NCC |
Hardware | |
Package | M.2 module (B key) |
SOC | MediaTek T700 series (MT6880VT) / Integrates ARM Corex-A55 |
Flash | MCP 4Gb+4Gb |
Power Supply | 3.135V-3.63V, typical: 3.3V |
Interfaces | USB 2.0 / USB 3.0 / SIM |
GPIO (Reset / Power / LED ) / UART | |
RF Antenna port | ANT0: 617 MHz ~ 5000 MHz |
ANT1: 1805 MHz ~ 5000 MHz | |
ANT2: 1710 MHz ~ 5000 MHz | |
ANT3: 617 MHz ~ 5000 MHz | |
Dimensions | 52mm x 30mm x 2.4mm (Max) |
Weight | 8.7g |
Operation Temp | -30 ~ +70 ℃ |
Storage Temp | -40 ~ +90 ℃ |
Software | |
Update / Management. | Firmware update via USB |
OS Version. | TBD (Depends on host OS) Module support from Linux 4.19 |
Drivers | USB 3.0 RNDIS/MBIM |
Pin define | ||||
Pin No. | Pin Name | Pin No. | Pin Name | |
74 | +3.3V | 75 | CONFIG_2 (GND) | |
72 | +3.3V | 73 | VIO_CFG (NC) | |
70 | +3.3V | 71 | GND | |
68 | NC | 69 | CONFIG_1 (GND) | |
66 | SIM Detect (I) (1.8V) | 67 | RESET# (I) (1.8V) | |
64 | COEX1 (IO) (1.8V) | 65 | ANTCTL3 (O) (1.8V) | |
62 | COEX2 (IO) (1.8V) | 63 | ANTCTL2 (O) (1.8V) | |
60 | COEX3 (IO) (1.8V) | 61 | ANTCTL1 (O) (1.8V) | |
58 | MIPI2_D_SDATA (IO) (1.8V) | 59 | ANTCTL0 (O) (1.8V) | |
56 | MIPI2_D_SCLK (O) (1.8V) | 57 | GND | |
54 | PEWake# (IO) (3.3/1.8V) | 55 | REFCLKP | |
52 | CLKREQ# (IO) (3.3/1.8V) | 53 | REFCLKN | |
50 | PERST# (IO) (3.3/1.8V) | 51 | GND | |
48 | NC | 49 | PERp0 | |
46 | NC | 47 | PERn0 | |
44 | I2C_IRQ# (I) (1.8V) | 45 | GND | |
42 | I2C_SDA (IO) (1.8V) | 43 | PETp0 | |
40 | I2C_SCL (O) (1.8V) | 41 | PETn0 | |
38 | NC | 39 | GND | |
36 | USIM1_PWR (O) | 37 | USB3.0_RX+ | |
34 | USIM1_DATA (IO) | 35 | USB3.0_RX- | |
32 | USIM1_CLK (O) | 33 | GND | |
30 | USIM1_RESET (O) | 31 | USB3.0_TX+ | |
28 | I2S0_LRCK (IO) (1.8V) | 29 | USB3.0_TX- | |
26 | W_DISABLE2# (I) (3.3/1.8V) | 27 | GND | |
24 | I2S0_DO (O) (1.8V) | 25 | DPR (I) (1.8V) | |
22 | I2S0_DI (I) (1.8V) | 23 | WOWWAN# (IO) (1.8V) | |
20 | I2S0_BCK (IO) (1.8V) | 21 | CONFIG_0 (GND) | |
Notch | Notch | |||
Notch | Notch | |||
Notch | Notch | |||
Notch | Notch | |||
10 | LED1# (O) (3.3V) | 11 | GND | |
8 | W_DISABLE1# (I) (3.3/1.8V) | 9 | USB_D- | |
6 | FULL_CARD_POWER_OFF# (I) (3.3/1.8V) | 7 | USB_D+ | |
4 | +3.3V | 5 | GND | |
2 | +3.3V | 3 | GND | |
1 | CONFIG_3 (NC) |
Weight | 0.015 kg |
---|---|
Dimensions | 9.5 × 6.5 × 1.5 cm |